WARNING!
Harmful if swallowed
Causes eye irritation
May cause an allergic skin reaction
May cause respiratory irritation
This product is not recommended for human consumption
For industrial use only
CAUTION!
Keep out of reach of children
Keep container tightly closed
Wash hands thoroughly after handling
Do not eat, drink or smoke when using this product
Wear protective gloves/protective clothing/eye protection/face protection
IF ON SKIN: Wash with plenty of soap and water
IF IN EYES: Rinse continuously with water for several minutes
Store in a closed container
Dispose of contents/containers in accordance with Federal, State/Provincial, and/or local regulations
ROUTES OF ENTRY
Inhalation, Ingestion, Skin/Eye Contact
POTENTIAL HEALTH EFFECTS
EYE CONTACT: May cause moderate irritation. Do not allow material to come in contact with eyes.
SKIN CONTACT: May cause moderate skin irritation.
INHALATION: May cause irritation to the respiratory tract.
INGESTION: Harmful if swallowed. May cause irritation to the mouth, throat, and stomach. May cause abdominal discomfort, nausea, vomiting, and/or diarrhea.
CHRONIC: Not established.
FIRST AID MEASURES
EYES: Flush with plenty of water, contact a physician. If contact lenses can be removed easily, flush eyes without contact lenses.
SKIN: Wash affected area with plenty of warm, soapy water. If irritation persists, seek medical attention.
INGESTION: Call a physician or Poison Control Center immediately. Do not induce vomiting.
INHALATION: Remove to fresh air. If not breathing, seek immediate medical attention.
FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry chemical, foam
SPECIAL FIRE FIGHTING PROCEDURES: Do not use water. Use NIOSH-approved self-contained Breathing Apparatus and full protective clothing if involved in a fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: This product does not present any unusual fire and explosion hazards.
ACCIDENTAL RELEASE MEASURES
If material spills or leaks, collect and place into a properly labeled waste container. Remove traces of tacky flux using cloth rags or paper towels moistened with Isopropyl Alcohol. Follow on-site personal protective equipment recommendations.
HANDLING/STORAGE
Keep containers tightly closed when not in use. Use care to avoid spills. Avoid inhalation of fumes or dust. Avoid contact with eyes, skin, and clothing.
OTHER PRECAUTIONS
Empty containers may retain product residues in vapor, liquid, and/or solid form. All labeled hazard precautions should be observed.
WORK HYGIENIC PRACTICES
Cosmetics/Food/Drink/Tobacco should not be consumed or used in work areas. Always wash hands after handling material and before applying or using cosmetics/food/drink/tobacco.
EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLVs.
RESPIRATORY PROTECTION: Use with adequate ventilation.
EYE PROTECTION: Use with appropriate safety glasses.
SKIN PROTECTION: Protective gloves and clothing should be worn when handling material. Wash hands thoroughly with soap and water upon leaving the work area.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Clear, White, or Yellow to Dark Amber gel
ODOR: Mild odor
STABILITY AND REACTIVITY
STABILITY: Stable
CONDITIONS TO AVOID (STABILITY): Freezing temperatures. High temperatures.
INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizing materials
HAZARDOUS DECOMPOSITION/BY-PRODUCTS
Harmful organic fumes and toxic oxide fumes may form at elevated temperatures.
POSSIBILITY OF HAZARDOUS REACTIONS
Will not occur
DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD:
Scrap and waste solder should be stored in a dry, sealed container for later disposal. Disposal must be in accordance with Federal, State/Provincial, and Local Regulations.
TRANSPORT HAZARD CLASSES
US DOT Hazardous Material Classification: Tacky Flux is not listed as a DOT hazardous material
Water Transportation: Tacky Flux is not listed as a hazardous material
IATA Hazardous Material Classification: Tacky Flux is not listed as IATA hazardous material
DISCLAIMER
The information contained herein is based on data considered to be accurate but does not purport to be all-inclusive and shall be used only as a guide. No warranty is expressed or implied regarding the accuracy of this data and Inventec Performance Chemicals USA or AMTECH DIRECT shall not be held liable for any damage resulting from any handling or contact with the above product. Liability is expressly disclaimed for loss or injury arising out of use of this information or the use of any materials designated.