RMA-223-TF no-clean RMA high-activity tacky flux (ROL0) - 5g syringe kit

AMTECH RMA-223-TF is a no-clean rosin mildly active tacky solder flux for tin-lead applications. Formulated for syringe, stencil printing, and rework on all PCB surface finishes, can be used for BGA sphere attachment and reballing, also designed to work on all flip chip bumping and chip scale packaging sites.

Contains a UV-tracer flux splatter detection and cleaning verifications - RMA-223-TF will glow bright white in UV light.

Recommended Profile

To achieve better results with voiding or to reduce tombstoning, as a starting point for process optimization using RMA-223-TF consider longer soaking zone, (140-180°C) for 60-90 seconds, with a rapid pre-heat stage. If there is evidence of solder de-wetting, consider lowering the peak reflow temperature, or reduce the time above liquidus to <60 seconds.

Cleaning

RMA-223-TF is a Rosin Mildly Active tacky flux that can be left on the board for many SMT assemblies. For applications requiring cleaning, RMA-223-TF can be cleaned using commercially available flux residue remover.

Storage and Handling

Tacky flux should be stored at room temperature (20-25°C). Syringes and cartridges should be stored vertically with the dispensing tip down. Properly stored tacky flux has a 12 month shelf life.

WARNING: Original AMTECH flux neither indicates RMA-223-UV on any packaging nor adds TPF extension, those are counterfeited replicas

Compliance